WPL 13 E

0,00 рсд


  • Air-water heat pumps
  • High output and excellent COP even at low outside temperatures
  • For internal or external installation
  • Ideally suited to modernisation
  • Extremely quiet operation
  • Also ideal for use in older buildings
  • High coefficient of performances
  • Integral electric booster heater

Product details

The heat pumps in the WPL E series are suitable for both new build and renovations. The intermediate vapour injection means a high flow temperature and exemplary heating output are achieved even at low outside temperatures. Even at -20 °C, the WPL still reaches flow temperatures of +60 °C. This ensures efficient heating and DHW operation throughout the year. The lower the required flow temperature, the higher the efficiency of the heat pump. The distance between the fins of the evaporator, the heating of the condensate pan via the refrigerant circuit, and the control of the refrigerant circuit reversal enable optimum defrosting and therefore efficient operation.
  • Type

    Product Number


    Output at A2/W35 (EN 14511)

    8,09 kW

    Output at A-7/W35 (EN 14511)

    6,77 kW

    Coefficient of performance at A-7/W35 (EN 14511)


    Coefficient of performance at A2/W35 (EN 14511)


    Technical data

    Energy efficiency class, heat pump W35


    Energy efficiency class, W55 heat pump


    Energy efficiency class, composite system (heat pump + controller) W35


    Energy efficiency class, composite system (heat pump + controller) W55


    SCOP (EN 14825)


    Sound power level outdoor installation (EN 12102)

    64 dB(A)

    Sound power level indoor installation (EN 12102)

    56 dB(A)

    Rated compressor voltage

    400 V

    Rated voltage, emergency/booster heater

    400 V

    Rated control voltage

    230 V


    1116 mm


    784 mm


    1182 mm


    205 kg

    Preliminary specification

    Technical data and product variants

    For further details and product variants please refer to data sheet.

    Download as PDF