HPA-O 6 CS Plus compact Set S

Kategorije: ,

 

 

HPA-O 6 CS Plus compact Set S

0,00 рсд

Opis

  • Little space required
  • Buffer cylinder not required if the minimum flow rate is sufficient

Product details

SET COMPONENTS: Heat pump and cylinder and hydraulic module including DHW cylinder with internal indirect coil. With circulation pump, 3/2-way diverter valve, 12 litre expansion vessel for the heating system, safety valve and electric emergency/booster heater. Control is via the integral heat pump manager.APPLICATION: Inverter air source heat pump with output-dependent control, designed as a mono block appliance for compact outdoor installation. Can be used for heating and DHW; also provides efficient cooling via circuit reversal. Ideally suited for use in new builds or buildings with a low system temperature. Sold in perfectly matched sets with compact indoor units for straightforward, space saving installation.

EQUIPMENT/CONVENIENCE: Optimum noise reduction due to encapsulated refrigerant circuit and acoustically isolated compressor. With integral heat and electricity metering via refrigerant circuit data.

EFFICIENCY: The waste heat from the inverter is used to raise the return temperature. This increases the overall efficiency of the system. Demand-dependent and energy efficient defrosting by reversing the circuit.

INSTALLATION: Accessories for effective condensate drainage are available for both floorstanding or wall mounted installations. Integral anti-vibration mounts for direct connection to the heating system. Easy access to the electrical connection panel without having to open the appliance.

  • Type

    Product Number

    238994

    Technical data

    Output at A2/W35 (EN 14511)

    5,30 kW

    Output at A-7/W35 (EN 14511)

    6,00 kW

    Coefficient of performance at A2/W35 (EN 14511)

    3,80

    Coefficient of performance at A-7/W35 (EN 14511)

    2,98

    Energy efficiency class, heat pump W35

    A+++

    Energy efficiency class, W55 heat pump

    A++

    Energy efficiency class, composite system (heat pump + controller) W35

    A+++

    Energy efficiency class, composite system (heat pump + controller) W55

    A++

    Cooling capacity at A35/W7 max.

    5,00 kW

    Cooling capacity at A35/W18 max.

    5,00 kW

    Cooling capacity at A35/W7 partial load

    2,50 kW

    Cooling capacity at A35/W18 partial load

    2,50 kW

    Sound power level (EN 12102)

    57 dB(A)

    Sound pressure level at 5 m distance in a free field

    35 dB(A)

    Rated compressor voltage

    230 V

    Max. application limit on the heating side

    60 °C

    Height

    812 mm

    Width

    1152 mm

    Depth

    524 mm

    Weight

    91 kg

    More details regarding set contents can be found under the relevant product

    The necessary plinth or wall mounting bracket is available as an accessory

    Technical data and product variants

    For further details and product variants please refer to data sheet.

    Download as PDF

Installation Information:

Please ask your local power supply utility or a registered electrician to install appliances that are not fully wired, i.e. ready to plug in. The electrician should also be able to assist you with obtaining the agreement of the respective power supply utility required for the appliance installation.

Povezani proizvodi